Product type | Sensors & Stats |
IP rating | IP65 |
Manufacturer | Sontay |
Sensing Element | TT-D-Z (10K NTC) Carel |
Explore at IACS our full range of Sontay Sensors for your HVAC system
The Sontay TT-D-Z is a temperature used to measure air temperature in ducts.
A neoprene gasket is included with this selection of duct Temperature sensors to help guarantee a tight seal between the sensor and the duct. For adjusting penetration depth, a flange plate is provided (order as TT-DFP). Units come with either a high-quality thermistor, a nickel or a platinum sensing element.
Its dimensions are 80 x 79 x 44 mm and the weight 160 g.
The IP Protection is IP65.
For technical advice, refer to the Sontay manualsheet and contact our IACS technical support team.
Previously known as TT-322-Z
Features
Output types:
Passive Resistive
Active (selectable) Current 4-20mA or
Voltage 0-10Vdc
Accuracy:
Thermistor ±0.2°C 0 to 70°C (32 to 158°F)
PT100a ±0.2°C @ 25°C (77°F)
PT1000a ±0.2°C @ 25°C (77°F)
NI1000 ±0.4°C @ 0°C (32°F)
-CVO ±0.4°C @ 25°C (77°F)
Probe:
Material Stainless Steel
Dimensions 65, 150, 250mm x 6mm dia.
(2.56, 5.91, 9.84" x 0.24" dia.)
Housing:
Material ABS (flame retardant type VO)
Dimensions 75 x 70 x 50mm
(2.91 x 2.76 x 1.97”)
Protection:
Snap-shut lid IP54
IP65 (see page 3 note 6 of datasaheet)
Ambient range -30 to 70°C (-22 to 158°F)
Weight 160g (0.35lb)
Country of origin UK