TRY24-SR - Belimo Rotary actuator 2 Nm | ideal for ball valves

At IACS we provide Free Delivery and Next 1-2 day Delivery for all the Belimo Actuators in stock.

The Belimo TRY24-SR is an Actuator used in HVAC applications and air ventilation systems.

This type of Actuator applies a Rotary motion to regulate the damper.

The Torque force applied by the TRY24-SR is 2 Nm.

The power supply requested for this Rotary Actuator is 24Vac/Vdc.

Find the appropriate Belimo Actuator for your system at the greatest price at iacs.

If you have questions about size or installation, consult the Belimo custom datasheet above or send an email to iacs to get personalised guidance.

TRY24-SR - Rotary actuator 2 Nm

•    AC / DC 24 V, modulating
•    Running time motor 35 s
•    Operating range DC 0.5...10 V
•    IP 40, Manual override temporary

Features

• Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal.


• Simple direct mounting Straightforward direct mounting on the ball valve with only one screw. The mounting position in relation to the ball valve can be selected in 90°<) steps.


• Manual override Manual operation with lever possible (the gearing is disengaged for as long as the self-resetting lever is pressed).


• High functional reliability The actuator is overload-proof and automatically stops when the end stop is reached.The actuator switches off for seven seconds in the case of blocking, then attempts to restart. If the blocked condition persists, the actuator attempts to restart once every two minutes a total of 15 times and subsequently once every two hours.


• Combination valve actuators Refer to the valve documentation for suitable valves, their permitted media temperatures and closing pressures.

•    Electrical Nominal voltage AC 24 V, 50/60 Hz DC 24 V
•    Power supply range AC 19.2 ... 28.8 V DC 21.6 ... 28.8 V 
•    Power consumption operation 0.5W @ nominal torque Dimensioning 1 VA
•    Connection Cable 1 m, 3 x 0.75 mm2
•    Parallel operation Yes (note performance data for supply!)
•    Functional data Torque Motor Min. 2 Nm @ nominal voltage 
•    Control Control signal Y DC 0 ... 10 V, Input impedance 100 ka Operating range DC 2 ... 10 V for 0 ... 100%<)  (0 ... 90°<)  )
•    Manual override Temporary gear latch
•    Running time 35 s / 90°<)
•    Noise level Motor Max. 45 dB 
•    Position indication Mechanical
•    Safety Protection class III Extra-low voltage
•    Degree of protection IP40
•    EMC CE according to 89/336/EEC
•    Mode of operation Type 1 (acc. to EN 60730-1)
•    Rated impulse voltage 0.8 kV (acc. to EN 60730-1)
•    Control pollution degree 3  (acc. to EN 60730-1)
•    Ambient temperature range –7 ... +50°C
•    Media temperature +5 ... +100°C (in ball valve)
•    Media temperature +5 ... +130°C (in ball valve)
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 2
•    Weight Approx. 400 g (without ball valve)