TRY24 - Belimo Rotary actuator 2 Nm | ideal for ball valves

Find all the components for your ventilation system at IACS. All Belimo Actuators on hand are eligible for Free Delivery and 1-2 Delivery.

The Belimo TRY24 is a kind of Actuator used in HVAC applications and air ventilation systems.

To control the damper, this kind of Actuator turns it by Rotary motion.

The Torque used by the TRY24 is 2 Nm.

This Belimo Actuator requests a power supply of 24Vac/Vdc.

Find at IACS the ideal Belimo Actuator compatible with your system at the best price.

If you are unsure about size or installation, refer to the Belimo custom datasheet above or message iacs to receive special instructions and a custom quote.

TRY24 - Rotary actuator 2 Nm

•    AC / DC 24 V, Open/Close
•    Running time motor 35 s
•    IP 40, Manual override temporary

Features

• Simple direct mounting Straightforward direct mounting on the ball valve with only one screw. The mounting position in relation to the ball valve can be selected in 90°<) steps.


• Manual override Manual operation with lever possible (the gearing is disengaged for as long as the self-resetting lever is pressed).


• Combination valve actuators Refer to the valve documentation for suitable valves, their permitted media temperatures and closing pressures.

•    Electrical Nominal voltage AC 24 V, 50/60 Hz DC 24 V
•    Power supply range AC 19.2 ... 28.8 V DC 21.6 ... 28.8 V 
•    Power consumption operation 0.5W @ nominal torque Dimensioning 0.5 VA
•    Connection Cable 1 m, 3 x 0.75 mm2
•    Parallel operation Yes (note performance data for supply!)
•    Functional data Torque Motor Min. 2 Nm @ nominal voltage 
•    Manual override Temporary gear latch
•    Running time 35 s / 90°<)
•    Noise level Motor Max. 45 dB 
•    Position indication Mechanical
•    Safety Protection class III Extra-low voltage
•    Degree of protection IP40
•    EMC CE according to 89/336/EEC
•    Mode of operation Type 1 (acc. to EN 60730-1)
•    Rated impulse voltage 0.8 kV (acc. to EN 60730-1)
•    Control pollution degree 3  (acc. to EN 60730-1)
•    Ambient temperature range –7 ... +50°C
•    Media temperature +5 ... +100°C (in ball valve)
•    Media temperature +5 ... +130°C (in ball valve)
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 2
•    Weight Approx. 400 g (without ball valve)