IP rating | IP54 |
Manufacturer | Belimo |
Power Supply | 230Vac, 1Ph, 50Hz |
Torque | 2 Nm |
Running time | 30 to 45 sec |
Actuator type | Rotary |
Ideal for | ball valves |
Find all parts for your ventilation system at iacs, the Free Delivery and 1-2 Delivery is available for all the Belimo Actuators in stock
The Belimo TRY230 is a type of Actuator used in HVAC and ventilation systems.
This kind of Actuator rotates the damper in order to control it.
The force applied by the Torque of the TRY230 is 2 Nm.
This Rotary Actuator needs to be supported by a power supply of 230Vac.
The ideal Belimo Actuators for your system are most affordable at iacs.If you have questions concerning size or installation, refer to the Belimo custom datasheet above or email iacs for individualised support.
TRY230 - Rotary actuator 2 Nm
• AC 230 V, Open/Close
• Running time motor 35 s
• IP 40, Manual override temporary
Features
• Electrical Nominal voltage AC 230 V, 50 Hz
• Power supply range AC 207 ... 253 V
• Power consumption operation 1 W @ nominal torque Dimensioning 1 VA
• Connection Cable 1 m, 3 x 0.75 mm2
• Parallel connection Yes
• Functional data Torque Motor Min. 2 Nm @ nominal voltage
• Manual override Temporary gear latch
• Running time 35 s / 90°<)
• Noise level Motor Max. 45 dB
• Position indication Mechanical
• Safety Protection class II Totally insulated
• Degree of protection IP40 in all mounting positions
• EMC CE acc. to 89/336/EEC Low-voltage directive CE acc. to 73/23/EEC
• Mode of operation Type 1 (acc. to EN 60730-1)
• Rated impulse voltage 4 kV (acc. to EN 60730-1)
• Control pollution degree 3 (acc. to EN 60730-1)
• Ambient temperature range –7 ... +50°C
• Media temperature +5 ... +100°C (in ball valve)
• Medium temperature with R4..DK ball valve +5 ... +130°C (in ball valve)
• Non-operating temperature –40 ... +80°C
• Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
• Maintenance Maintenance-free
• Dimensions / Weight Dimensions See «Dimensions» on page 2
• Weight Approx. 400 g (without ball valve)