SR230P-5 Rotary actuator Butterfly Valve, 20 Nm, AC 230V, 90 s - Belimo | ideal for rotary valves and butterfly valves

For all of the Belimo Actuators that are in stock at iacs, we offer Free Delivery and Next 1-2 Day Delivery.

The Belimo SR230P-5is a type of Actuator used to open valves in HVAC systems and applications.

The Torque used by the SR230P-5 is 20 Nm.

This Belimo Actuator requests a power supply of 230Vac.

You may utilise this Belimo component with Butterfly Valves.

If you have questions concerning size or installation, refer to the Belimo custom datasheet above or email iacs for individualised support.

SR230P-5 Rotary actuator Butterfly Valve, 20 Nm, AC 230V, 90 s

• Rotary actuator butterfly valve
• 20 Nm, 90°
• AC 230V, open-close, 3-point
• Motor running time 90 s
• IP 66/67, manual override with push-button
• Connection cable FRNC 1 m
• Position indication mechanical, pluggable
• for butterfly valves

Fields of application: The actuator is particularly suited for use in difficult conditions, e.g. in the field of: - Wood drying - Animal breeding - Food processing - Agricultural - Swimming baths / bathrooms - Rooftop ventilation plant rooms - General outdoor applications - Low temperatures (the separately obtainable actuator with integrated factory-installed heating is suitable for utilisation down to –40°C) - Changing atmosphere / frequent and severe temperature fluctuations (recommendation: use the actuator with integrated factory-installed heating which can be ordered separately to prevent internal condensation)

Resistances Noxious gas test EN 60068-2-60 (Fraunhofer Institut ICT / DE) Salt fog spray test EN 60068-2-52 (Fraunhofer Institut ICT / DE) Ammoniac test DIN 50916-2 (Fraunhofer Institut ICT / DE) Climate test IEC60068-2-30 (Trikon Solutions AG / CH) Disinfectant (animals) (Trikon Solutions AG / CH) UV Test (Solar radiation at ground level) EN 60068-2-5, EN 60068-2-63 (Quinel / Zug CH)

Used materials Actuator housing polypropylene (PP) Cable glands / hollow shaft polyamide (PA) Connecting cable FRNC Clamp / screws in general Steel 1.4404 Seals EPDM Form fit insert aluminium anodised

Tappet shaft The form fit adapter ZPV-14 is included in the scope of delivery.

Direct mounting: Simple direct mounting on the rotary valve or butterfly valve with mounting flange. The mounting orientation in relation to the fitting can be selected in 90° steps.

Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked). The housing cover must be removed for manual override.

High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.

Adjustable angle of rotation: Adjustable angle of rotation with mechanical end stops. Standard setting 0 ... 90°. The housing cover must be removed to set the angle of rotation.

Combination valve/actuator For valves with the following mechanical specifications in accordance with ISO 5211 F05: - Square stem head SW = 14 mm for form fit coupling of the rotary actuator. - Hole circle d = 50 mm

Electrical data:

• Nominal voltage AC 230 V
• Nominal voltage frequency 50/60 Hz
• Nominal voltage range AC 85...265 V
• Power consumption in operation 3 W
• Power consumption in rest position 0.6 W
• Power consumption for wire sizing 7 VA
• Connection supply / control Cable 1 m, 3 x 0.75 mm² (halogen-free)
• Parallel operation Yes (note the performance data)

Functional data:

• Torque motor Min. 20 Nm
• Manual override Gear disengagement with push-button, can be locked
• Running time motor 90 s / 90°
• Sound power level motor max. 45 dB(A)
• Position indication Mechanically, pluggable

Safety:

• Protection class IEC/EN II Protective insulated
• Protection class UL II Protective insulated
• Degree of protection IEC/EN IP66 + IP67
• Degree of protection NEMA/UL NEMA 4, UL Enclosure Type 4
• EMC CE according to 2004/108/EC
• Low voltage directive CE according to 2006/95/EC
• Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
• Certification UL cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02
• Mode of operation Type 1
• Rated impulse voltage supply / control 2.5 kV
• Control pollution degree 4
• Ambient temperature -30...50°C
• Ambient temperature note -40...50°C for actuator with integrated heating
• Non-operating temperature -40...80°C
• Ambient humidity 100% r.h.
• Maintenance Maintenance-free

Mechanical data:

Connection flange F05

Weight: Approx. 2.0 kg