R3032-BL2 Belimo 3-way Change-over Ball Valve PN40

R3032-BL2 3-way Change-over Ball Valve PN40

• 3-way change-over ball valve, ps 1600 kPa
• Internal thread 1 1/4", DN 32, kvs 9 m³/h
• Housing brass body nickel-plated
• Closing element chrome-plated brass
• Stem nickel-plated brass
• Stem seal O-ring EPDM
• Valve seat PTFE, O-ring EPDM
• Medium temperature -10...100°C
• Leakage rate A, air bubble tight (EN 12266-1)

Mode of operation: The change-over ball valve is adjusted by a rotary actuator. The rotary actuator is connected by an open-close signal.

Functional data:

• Media Cold and warm water, water with glycol up to max. 50% vol.
• Medium temperature -10...100°C
• Medium temperature note The allowed media temperature can be limited, depending on the type of actuator. Limitations can be found in the respective data sheets of the actuators.
• Rated pressure ps 1600 kPa
• Closing pressure ∆ps 500 kPa
• Differential pressure ∆pmax 350 kPa
• Differential pressure note 200 kPa for low-noise operation
• Leakage rate Leakage rate A, air-bubble-tight (EN 12266-1)
• Pipe connectors Internal thread according to ISO 7-1
• Angle of rotation 90°
• Installation position Upright to horizontal (in relation to the stem)
• Maintenance Maintenance-free

Materials:

• Housing Brass body nickel-plated
• Closing element Chrome-plated brass
• Stem Nickel-plated brass
• Stem seal O-ring EPDM
• Valve seat PTFE, O-ring EPDM