Product type | Actuator |
IP rating | IP54 |
Input Signal | 0..10 Vdc, MFT, Proportional/MFT |
Manufacturer | Belimo |
Power Supply | 24Vac/Vdc |
Torque | 8 Nm |
Running time | Quick (2.5 to 20 sec) |
Actuator type | Rotary |
Find all the components for your ventilation system at IACS. All Belimo Actuators on hand are eligible for Free Delivery and 1-2 Delivery.
The Belimo NMQ24A-MF is a kind of Actuator used to manage dampers in HVAC applications and systems.
To control the damper, this kind of Actuator turns it by Rotary motion.
The Torque used by the NMQ24A-MF is 8 Nm.
This Belimo Actuator requests a power supply of 24Vac/Vdc.
Find at IACS the ideal Belimo Actuator compatible with your system at the best price.
If you are unsure about size or installation, refer to the Belimo custom datasheet above or message iacs to receive special instructions and a custom quote.
NMQ24A-MF - Damper actuator 8 Nm, 4.0 s, 95°
• AC / DC 24 V, modulating, MFT
• Manual override with push-button
• Control DC 0...10 V (0...32 V adjustable)
• Operating range DC 2...10 V, 0...32 V adjustable
• Position feedback DC 2...10 V, 0...10 V,adjustable
• Connection PVC cable 1m
• Direction of rotation reversible (right/left)
• Angle of rotation limit. mechanical integral
• Spindle driver universal spindle clamp
Features
• Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
• Nominal voltage range AC/DC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
• Power consumption In operation 13 W @ nominal torque
• At rest 2 W
• For wire sizing 23 VA
• Connection Cable 1 m, 4 x 0.75 mm2
• Functional data Factory settings
• Torque (nominal torque) Min. 8 Nm @ nominal voltage
• Control Control signal Y DC 0 ... 10 V, input impedance 100 kΩ
• Position feedback (measuring voltage U) DC 2 ... 10 V, max. 0.5 mA
• Position accuracy ± 5%
• Direction of rotation Reversible with switch 0 / 1
• Direction of motion at Y = 0 V At switch position 0 resp. 1
• Manual override Gearing latch disengaged with pushbutton,can be locked
• Angle of rotation Max. 95° , can be limited at both ends withadjustable mechanical end stops
• Angle of rotation limitingmin. 30°
• Running time 4 s / 90°
• Automatic adjustment of running time, operatingrange and measuring signal U to match themechanical angle of rotationManual triggering of the adaption by pressingthe „Adaption“ button or with the PC-Tool
• Override control MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position, only AC) = 50%
• Sound power level Max. 52 dB (A)
• Position indication Mechanical, pluggable
• Negative torque!≤50% from nominal torque (Caution: can only be used with restrictions. Please contact your Belimo representative.)
• Safety
• Protection class III Safety extra-low voltage UL Class 2 Supply
• Degree of protection IP54 in any mounting position NEMA 2, UL Enclosure Type 2
• EMC CE according to 2004/108/EC
• Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 cULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-1:02
• Mode of operation Type 1
• Rated impulse voltage 0.8 kV
• Control pollution degree 3
• Ambient temperature – 30 ... + 40°C
• Non-operating temperature – 40 ... + 50°C
• Ambient humidity 95% RH, non-condensating
• Maintenance Maintenance-free
• Dimensions / Weight
• Dimensions See «Dimensions» on page 6
• Weight Approx.970 g