NM230PSR - Belimo Damper actuator 8 Nm, 150 s, 95° AC 230 V

Find all the components for your ventilation system at IACS. All Belimo Actuators on hand are eligible for Free Delivery and 1-2 Delivery.

The Belimo NM230PSR is a kind of Actuator used to manage dampers in HVAC applications and systems.

To control the damper, this kind of Actuator turns it by Rotary motion.

The Torque used by the NM230PSR is 8 Nm.

This Belimo Actuator requests a power supply of 230Vac.

Find the appropriate Belimo Actuator for your system at the greatest price at iacs.

If you have questions about size or installation, consult the Belimo custom datasheet above or send an email to iacs to get personalised guidance.

NM230PSR - Damper actuator 8 Nm, 150 s, 95° AC 230 V

•    Modulating
•    IP 66/67, Manual override by means of push-button
•    Control DC 0...10 V
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Connection cable FRNC 1 m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp

Features
 

• Fields of application The actuator is particularly suited for use in difficult conditions, e.g. in the field of:
  – Wood drying
  – Animal breeding
  – Food processing
  – Agricultural
  – Swimming baths / Bathrooms
  – Rooftop units
  – General outdoor applications
  – Low temperatures (the separately available actuator with built-in heater ex works is suitable for use up to –40°C)
             – Changing climate / frequent and strong fluctuations in temperature (Recommendation: to prevent internal condensation, use the separately available                 actuator with built-in heater ex works)






Resistances
Test	Test standard	Testing body
Noxious gas tests	EN 60068-2-60	Fraunhofer Institute ICT / DE
Salt fog spray test	EN 60068-2-52	Fraunhofer Institute ICT / DE
Ammoniac test	DIN 50916-2	DIN 50916-2
Climatic test	IEC 60068-2-30	Trikon Solutions AG / CH
Disinfectants (animals)		Trikon Solutions AG / CH
UV test (Solar radiation at ground level)	EN 60068-2-5 EN 60068-2-63	Quinel / Zug CH



Used materials



Actuator parts	Material
Actuator housing	Polypropylene (PP)
Cable glands / hollow shaft	Polyamide (PA)
Connection cable	FRNC
Clamp / screws in general	Steel 1.4404
seals	EPDM
Form-fit insert	Anodised aluminium




• Manual override Manual operation is possible with the pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed or remains locked).
  
  
• Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.


• High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption Operation 3.5 W @ nominal torque
•     At rest 1 W
•     Wire sizing 6.5 VA
•     Connection Power supply Halogen-free cable 1 m, 2 x 0.75 mm2
•     Signals Halogen-free cable 1 m, 4 x 0.75 mm2
•     Functional data Torque (nominal torque) Min. 8 Nm @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, typical input impedance 100 kΩ
•     Operating range DC 2 ... 10 V
•     Position feedback (measuring voltage U) DC 2 ... 10 V, max. 1 mA
•     Auxiliary supply DC 24 V ±30%, max. 10 mA
•     Position accuracy ±5%
•     Direction of rotation Reversible with switch 0 / 1
•     Direction of motion at Y = 0 V At switch position 0 resp. 1
•     Manual override Gearing latch disengaged with pushbutton, can be locked
•     Angle of rotation Max. 95° , can be limited at both ends with adjustable
•     mechanical end stops
•     Running time 150 s / 90°
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class II totally insulated
•     Degree of protection IP66 + IP67
•     EMC CE according to 2004/108/EC
•     Low-voltage directive CE according to 2006/95/EC
•     Mode of operation Type 1 (EN 60730-1)
•     Rated impulse voltage 2.5 kV (EN 60730-1)
•     Control pollution degree 4 (EN 60730-1)
•     Ambient temperature –30 ... +50°C (actuator with built-in heater –40 ... +50°C)
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity 100% r.H.
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 3
•     Weight Approx. 1.3 kg