NM230P-S - Belimo Damper actuator 8 Nm, 150 s, 95° AC 230 V

Find all parts for your ventilation system at iacs, the Free Delivery and 1-2 Delivery is available for all the Belimo Actuators in stock

The Belimo NM230P-S is a type of Actuator used to control dampers in HVAC systems and applications.

This kind of Actuator rotates the damper in order to control it.

The force applied by the Torque of the NM230P-S is 8 Nm.

This Rotary Actuator needs to be supported by a power supply of 230Vac.

Find at IACS the ideal Belimo Actuator compatible with your system at the best price.

If you are unsure about size or installation, refer to the Belimo custom datasheet above or message iacs to receive special instructions and a custom quote.

NM230P-S - Damper actuator 8 Nm, 150 s, 95° AC 230 V

•    Open/Close, 3-point, 1 x SPDT
•    IP 66/67, Manual override by means of push-button
•    Control with single- / 2-wire contact
•    Auxiliary switch 0...100 % adjustable
•    Connection cable FRNC 1 m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp
•    Rating 1 mA...3(0.5)A, AC 250 V

Features
 

• Fields of application The actuator is particularly suited for use in difficult conditions, e.g. in the field of:
  
  – Wood drying
  – Animal breeding
  – Food processing
  – Agricultural
  – Swimming baths / Bathrooms
  – Rooftop units
  – General outdoor applications
  
  – Low temperatures (the separately available actuator with built-in heater ex works is suitable for use up to –40°C) >
             – Changing climate / frequent and strong fluctuations in temperature (Recommendation: to prevent internal condensation, use the separately available                 actuator with built-in heater ex works)

Resistances



Test	Test standard	Testing body
Noxious gas tests	EN 60068-2-60	Fraunhofer Institute ICT / DE
Salt fog spray test	EN 60068-2-52	Fraunhofer Institute ICT / DE
Ammoniac test	DIN 50916-2	DIN 50916-2
Climatic test	IEC 60068-2-30	Trikon Solutions AG / CH
Disinfectants (animals)		Trikon Solutions AG / CH
UV test (Solar radiation at ground level)	EN 60068-2-5 EN 60068-2-63	Quinel / Zug CH



Used materials



Actuator parts	Material
Actuator housing	Polypropylene (PP)
Cable glands / hollow shaft	Polyamide (PA)
Connection cable	FRNC
Clamp / screws in general	Steel 1.4404
seals	EPDM
Form-fit insert	Anodised aluminium



• Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent .


• Manual override Manual operation is possible with the pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed or remains locked).


• Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops. Standard setting 0 ... 90°<) .The housing cover must be removed to set the angle of rotation.


• High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.


• Flexible signalization Flexible signalization with adjustable auxiliary switch (0 ... 100%).

•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption Operation 2.5 W @ nominal torque
•     At rest 0.6 W
•     Wire sizing 6 VA
•     Auxiliary switch 1 x EPU, 1 mA ... 3 (0,5) A, AC 250 V (adjustable 0 ... 100%)
•     Connection Motor Halogen-free cable 1 m, 3 x 0.75 mm2
•     Auxiliary switch Halogen-free cable 1 m, 3 x 0.75 mm2
•     Functional data Torque (nominal torque) Min. 8 Nm @ nominal voltage
•     Direction of rotation Reversible with switch 0 resp. 1
•     Manual override Gearing latch disengaged with pushbutton, can be locked
•     Angle of rotation Max. 95°<) , can be limited at both ends with adjustable mechanical end stops
•     Running time 150 s / 90°<)
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class II totally insulated
•     Degree of protection IP66 + IP67
•     EMC CE according to 2004/108/EC
•     Low-voltage directive CE according to 2006/95/EC
•     Mode of operation Typ 1.B (EN 60730-1)
•     Rated impulse voltage 2.5 kV (EN 60730-1)
•     Control pollution degree 4 (EN 60730-1)
•     Ambient temperature –30 ... +50°C (actuator with built-in heater –40 ... +50°C)
•     Non-operating temperature range –40 ... +50°C
•     Ambient humidity 100% r.H.
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 3
•     Weight Approx. 1.3 kg