CQ24A-MPL Zone Rotary Actuator, AC/DC 24 V, 75 s - Belimo | ideal for zone valves

At IACS we provide Free Delivery and Next 1-2 day Delivery for all the Belimo Actuators in stock.

The Belimo CQ24A-MPL is an Actuator used in HVAC applications and air ventilation systems.

This type of Actuator applies a Rotary motion to regulate the damper.

The Torque force applied by the CQ24A-MPL is 1 Nm.

The power supply requested for this Rotary Actuator is 24Vac/Vdc.

IACS has the best prices on the right Belimo Actuators for your system.

Consult the Belimo custom datasheet above or contact iacs via email for personalised assistance if you have queries about size or installation.

CQ24A-MPL Zone Rotary Actuator, AC/DC 24 V, 75 s

• MPL (MP-Bus light)
• Positioning signal via Belimo MP-Bus
• Running time motor 75 s
• Connection PVC cable 1 m, IP 40
• Adjustable flow rate value

Mode of operation: The actuator receives its digital positioning signal from the higher level controller via the MP-Bus and drives to the position defined. Connection U serves as communication interface and does not supply an analogue measuring voltage. Note: Neither a conventional operation with a standard signal nor a parametrisation of signals (e.g. running time) is possible. With the parameterising devices a functional check can be executed and the MP adress can be assigned.

Simple direct mounting: Tool-free snap assembly. The actuator can be plugged on the valve by hand (Caution! Just vertical movements). Pins must match the holes on the flange. The mounting orientation in relation to the valve can be selected in 180° increments. (Possible two times)

Manual override: Click out the actuator and rotate the valve stem with the help of the actuator.

High functional reliability: The actuator is overload protected, requires no limit switches in intermediate positions and automatically stops when the end stop is reached (at rest).

Adjustable angle of rotation: The angle of rotation of the actuator can be changed by clip in 2.5° increments. This is used to set the maximum flow rate of the valve.

kv setting: Adjustable kv-values (C2..Q- ..) / max-values (C2..QP (T) - ..) are given in the respective zone valve data sheets. 2-way valve: Remove end stop clip and place at desired position. 3-way valve: Remove end stop clip (change-over application).

Electrical Data:

• Nominal voltage AC/DC 24 V
• Nominal voltage frequency 50/60 Hz
• Nominal voltage range AC 19.2...28.8 V / DC 21.6...28.8 V
• Power consumption in operation 0.6 W
• Power consumption in rest position 0.4 W
• Power consumption for wire sizing 1.1 VA
• Connection supply / control Cable 1 m, 3 x 0.75 mm²
• Parallel operation Yes (note the performance data)

Functional Data

1. Torque motor 1 Nm
2. Positioning signal Y via BELIMO MP-Bus
3. Manual override With actuator (clicked out) adjustable
4. Running time motor 75 s / 90°
5. Sound power level motor 35 dB(A)
6. Position indication Yes
7. Flow setting see product features

Safety: 

• Protection class IEC/EN III Safety extra-low voltage
• Degree of protection IEC/EN IP40
• EMC CE according to 2004/108/EC
• Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
• Mode of operation Type 1
• Rated impulse voltage supply / control 0.8 kV
• Control pollution degree 3
• Ambient temperature 10...40°C
• Non-operating temperature -7...50°C
• Ambient humidity 95% r.h., non-condensing
• Maintenance Maintenance-free

Weight: 0.21 Kg