CM24-SR-R Damper actuator 2 Nm, 75 s, AC / DC 24 V, modulating - Belimo

Find all parts for your ventilation system at iacs, the Free Delivery and 1-2 Delivery is available for all the Belimo Actuators in stock

The Belimo CM24-SR-R is a type of Actuator used to control dampers in HVAC systems and applications.

This kind of Actuator rotates the damper in order to control it.

The force applied by the Torque of the CM24-SR-R is 2 Nm.

This Rotary Actuator needs to be supported by a power supply of 24Vac/Vdc.

IACS has the best prices on the right Belimo Actuators for your system.

Consult the Belimo custom datasheet above or contact iacs via email for personalised assistance if you have queries about size or installation.

CM24-SR-R Damper actuator 2 Nm, 75 s, AC / DC 24 V, modulating

•    Damper actuator
•    2 Nm, 75 s,
•    AC / DC 24 V, modulating
•    IP 54, Manual override Gear disengagement with magnet
•    Control DC 0...10 V
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Connection PVC cable 1m
•    Direction of rotation rotation to the right (cw)
•    Running direction L (ccw) at Y= 0 V
•    Angle of rotation limit. mechanical integral

Features

• Mode of operation The actuator is controlled by means of a standard control signal DC 0 ... 10 V. It opens to the position dictated by this signal. The measuring voltage U allows the damper position (0 ... 100%) to be electrically indicated and serves as a follow-up control signal for other actuators.
  
  
• Simple direct mounting on the damper spindle with a universal spindle clamp (∅ 6 ... 12.7 mm). The actuator is then secured with the anti-rotation strap supplied, to prevent it from rotating.
  
  
• Manual override with magnet possible (the gear is disengaged as long as the magnet adheres to the symbol U. The magnet for gear disengagement is integrated in the position indicator.


• Adjustable angle of rotation with mechanical end stops.


• High functional reliability actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
  
  
• Home position When the supply voltage is switched on for the first time and after every voltage interruption, the synchronisation process is started and the actuator travels to home position (Y = 0 V).

•    Nominal voltage AC 24 V, 50/60 Hz DC 24 V
•    Nominal voltage range AC/DC 19.2 ... 28.8 V
•    Power consumption In operation At rest For wire sizing    1 W @ nominal torque 0.5 W 2 VA
•    Connection Cable 1 m, 4 x 0.75 mm2
•    Torque (nominal torque)   Min. 2 Nm @ nominal voltage
•    Control Control signal Y Operating range DC 0 ... 10 V, typical input impedance 100 DC 2 ... 10 V
•    Position feedback (Measuring voltage) DC 2 ... 10 V, max. 1 mA
•    Posotion accuracy ±5%
•    Angle of rotation Max. 95° , limited on both sides by means of adjustable, mechanical end stops
•    Sound power level Max. 35 dB (A)
•    Running time 75 s / 90°
•    Position indicator Mechanical, pluggable (with integrated magnet for gear disengagement)
•    Protection class III Safety extra-low voltage / UL Class 2 Supply
•    Degree of protection IP54 in any mounting position NEMA2, UL Enclosure Type 2
•    EMC CE according to 2004/108/EC
•    Certification cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02 Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•    Mode of operationType 1 (EN 60730-1)
•    Rated impulse voltage 0.8 kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature    –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H., non-condensating (EN 60730-1)
•    Maintenance – free