The AX-MPR3-6 DIN Rail Power Controller is designed to provide continuously adjustable control of electric heating loads from a BMS Controller or similar. Applications include electric heating coils, heating cables and electric furnaces. The AX-MPR3-6 use solid-state switching with “zero crossing technology” for minimum RFI and provide accurate switching control. All Power Controllers feature
Over Temperature Protection with automatic reset and Alarm Output, LED Indication of Output ON and are
designed to mount on TS35 section DIN Rail. No additional heatsinks are needed.
Input: 0-10Vdc
Power Supply: 24Vac/dc +/-10%
Alarm Output: 24Vac/dc as power supply - 0V when over temperature alarm is active
Rated Supply: 380 - 440Vac / 50-60Hz
Max Heater Duty: 6kW
Rated Load: 8.7A / phase @40°C
Dissipated Heat: 22W
LED Indication: ON when output is on.
Terminals: Rising Clamp for 0.5-2.5mm2 Cable
Ambient Temp. Range: 0 to 55°C. Note: the units are rated at 40°C. If using at higher ambient temperature, de-rate the unit by 10% for every 5°C above 40°C.