AX-MPR1-2 Single Phase DIN Rail mounting Power Regulator 2.0kW Thyristor

AX-MPR1-2 Single Phase 2.0kW Thyristor Features:

• 0-10Vdc Control Input
• 2kW Output
• PWM Control
• Auto Reset Over Temperature Protection
• Line Powered
• Neutral Pass Through Terminals
• LED Indication
• DIN Rail (TS35) Mounting

AX-MPR1-2 Single Phase 2.0kW Thyristor:

The AX-MPR1-2 DIN Rail mounting Power Regulators provide continuously adjustable control of electric heating loads from a 0-10V control input. Applications include electric heating coils, heating cables and electric furnaces. The AX-MPR1-2 uses solid-state switching with ‘zero crossing technology’ for minimum RFI and provides accurate switching control. The unit features over-temperature protection with automatic reset, LED Indication of Output ON and are designed to mount on TS35 section DIN Rail. No additional heatsinks are needed.

• Input: 0-10Vdc
• Power Supply: Line powered
• Max Heater Duty: See Overleaf
• Rated Load: See Overleaf
• Rated Supply: 220-255Vac / 50-60Hz
• LED Indication: ON when output is on.
• Dissipated Heat: See Overleaf
• Terminals-Control: Rising Clamp for 0.5-2.5mm² Cable
• Terminals-Power: Rising Clamp for 2.5mm² Stranded or 4mm² Solid Core Cable
• Ambient Temp. Range: 0 to 55°C Note; The units are rated at 40°C. If using at higher ambient temperature de-rate the units by 10% for every 5°C above 40°C.
• Dimensions: See Overleaf
• Weight: See Overleaf
• Country of Origin: United Kingdom