AX-MPR1-2-RL - Single Phase 2kW Raise/Lower Thyristor Features:
24Vac Raise/Lower Input
No additional heatsinks required
PWM Control
230Vac input from load
DIN Rail (TS35) Mounting
LED Indication
AX-MPR1-2-RL - Single Phase 2kW Raise/Lower Thyristor:
The AX-MPR1-2-RL DIN Rail Power Regulator is designed to operate from the output of a raise lower valve controller. The normal Raise/Lower (valve open/close) signal is converted to a pulse width modulated output for an electric heater. The AX-MPR1-2-RL is intended to operate with a 2.5 minute signal from fully closed to fully open; the output tracks the inputs in a linear fashion, automatically calibrating each time the minimum or maximum extremes are met. The output to the electric heater is controlled by solid-state switching with “zero crossing” technology to reduce RFI problems and provide accurate
switching control. The AX-MPR1-2-RL features LED indication of Output On.
Input: 24Vac Raise/Lower Input
Power Supply: 230Vac (from load input)
Max Heater Duty: See Overleaf
Rated Load: See Overleaf
Rated Supply: 220-255Vac / 50-60Hz
LED Indication: ON when output is on.
Dissipated Heat: See Overleaf
Terminals-Control: Rising Clamp for 0.5-2.5mm2 Cable
Terminals-Power: Rising Clamp for 1.5mm2 Stranded or 2.5mm2 Solid Core Cable
Ambient Temp. Range: AX-MPR-1-2-RL: 0 to 55°C Note; The units are rated at 30°C. If using at higher ambient temperature de-rate the units by 10% for every 5°C above 30°C.